Prices and lead times
Calculate transparently and plan realistically
The configurator instantly estimates material consumption and print duration from measured object volume, material, print quality, infill and quantity. No slicer run is required; the model is also technically reviewed before production.
- Minimum print subtotal by material
- PLA €4.90 · PETG €5.90 · TPU 95A €6.90 · PLA-CF €7.90 · PETG-CF €8.90
- PLA consumption tier per plate
- €0.12/g up to 100 g · then €0.0605/g
- Machine time
- €0.39 per estimated hour
- Setup fee
- €1.00 per required print plate and copy
The regular calculation basis
The instant price needs no slicer run: measured object volume and selected infill estimate filament consumption. The quality setting affects the resulting estimated print duration. The same fast formula is checked again on the server before the cart is enabled.
For PLA, the first 100 g on each print plate and copy cost €0.12/g and further estimated consumption costs €0.0605/g. Other materials scale with their material tariff. This is combined with €0.39 per estimated machine hour, a €1.00 setup fee per plate and copy and €2.50 per additional colour and copy. The highest material minimum in the order applies once: PLA €4.90 · PETG €5.90 · TPU 95A €6.90 · PLA-CF €7.90 · PETG-CF €8.90.
- Measured geometric object volume as the starting point
- Infill for estimated material consumption
- Quality setting for estimated machine time
- Declining consumption tier calculated separately per plate
- Material tariff for the selected filament
- €2.50 flat rate per additional colour and copy
How the instant price is calculated
Measured object volume and infill produce an instant consumption estimate. Material tariff, quality setting and the resulting estimated machine time form the variable price. Large consumption receives a lower rate above 100 g on each print plate; setup and additional colours remain fixed components.
- Instant estimate instead of a long slicer run
- Infill increases estimated filament consumption
- Quality affects estimated machine time
- Separate consumption tier and setup fee per print plate
Production time is not carrier transit time
Production starts only after payment or order acceptance and technical approval. Questions, file errors, material availability and machine load can change production time.
Only after production does the carrier transit time begin. The confirmed order window is therefore decisive, not the shipping-option label alone.
When an adjusted offer is required
Open or very complex meshes, unusual scaling, long print times, high support demand or special functional requirements can differ from the automatic estimate. Feasibility and price are clarified before production.
FAQ
Common questions
Why can a small part cost more than expected?
Small parts still require fixed work for review, setup, removal, quality control, packaging and payment processing.
Is there an automatic volume discount?
Large consumption automatically receives a lower rate above 100 g on each print plate. Every copy still needs its own print plates and is therefore charged including the setup fee for every required plate. Ask us about larger batches.
Does express mean immediate production?
No. Priority production and fast carrier transit are different services. The delivery window must be confirmed for the order.
Start with your model
Use the configurator or contact page for the next concrete step.